New machines
Latest arrivals

Used machines

DMC 10 Head sandblasting machine for producing patterns.

Item: # 58724
Mark : DMC  
Model: Effect 
Condition: Good  
Year: 2015 
Region : US 
Currency: USD 
Status: Available 
Description

One steel sandblasting roller, three steel cutting heads, one steel grooved roller, one soft rubber roller, one band saw, one hard rubber roller with tips, one steel brush, one soft brush. Used to create aged wood effects. Installed on a line of varnish for wood flooring.

One Steel Sanding Drum, three steel cut heads, one steel grooved drum, one soft rubber drum, one band saw, one hard rubber drum with spikes, one steel brush, one soft brush. Used to create distressed wood effects.

Description of the line of varnishes for hardwood floors with Costa Top and Bottom Sander 6 heads.

Maynyx 2015 Doucet / Strapper saw section infeed conveyor Holds bundles against the saw and cuts bundle straps / The feed chains contain three pallet elevators. Destaker Doucet 2015 A vacuum machine that unstacks pieces of wood to make a panel./Mekanika power table installed in 2004 that feeds the DMC Top and Bottom sandblaster./ Dubois 2004 adjustable air pressure table that separates the individual parts of the panel, which allows full coverage of the bevel and l sawdust removal./Roller Coater double Rigma installed in November 2014 Direct drive roller application system that allows simultaneous placement of wet to wet coatings and multiple coatings, allowing more changes fast. Adjustable height covers allow product variations from 1/8 ”to 2”. / Stain Brush Dubois Installéen2oo4 stain applicator with adjustable speed nylon / boar bristle brushes used to promote uniform coverage of the coating on the product UV 2 Stations Miltec / Dubois 2011 3 machines UV4, UV 11, UV13. With Kit d Height adjustable and powered ultra-violet illumination used to cure coatings. The units can be used as a complete polymerization machine (all layers) or as a B-stage polymerization machine (single layer) / Jet Air Tunnel Dubois 2004 forced-air heating system powered by natural gas. The purpose of the tunnel is to maintain the temperature of the panel surface to control gloss and adhesion. / Adjustable oscillating brush 2994 used to scrape the surface of the product in preparation for the next coating application. Only required after complete UV curing. Coater reverse fill roller driven on a roll with a reverse fill roller allowing the coatings to penetrate the open grain of some species and give the product a smoother finish. Height-adjustable coaters allow product variations from 1/8 "to 2". UV I Station 2011 Height adjustable and powered ultraviolet lighting set used to cure coatings. The units are only used as a B-stage (single-layer) curing machine. 2004 Dubois Standard Coater with Chain Driven Application Roller used to apply various types of coatings to the product. Height adjustable coatings allow product variations from 1/8 ”to 2”. 3 Station Denbber Brush with Adjustable Oscillating Brush used to scrape the product surface in preparation for the next coating application. Only required after complete UV curing. UV 4 Stations Dubois with Height adjustable and powered ultra-violet lighting set used to cure coatings. The unit is used as a final complete drying machine (all coats) and has a direct effect on the gloss. / Dubois 2004 inspection conveyor used to inspect the product, remove defects and reinsert the matching pieces at the ends into the panel , which makes it possible to send complete panels to packing stations. 55 '6' 'long and 5' wide. / Outfeed Bridge Mekanika2004 Transports product to individual packing stations in a repetitive pattern controlled by sensors. Can be replaced manually, if necessary. / Outfeed accumulator Mekanika 2004 Stacking station The unit folds the crates and allows the accumulation of several full crates at each station before being transferred to the crate stacker (pit). Dynaric 2004 strap station These units seal the box finished with one nylon strap per machine for a total of 3 straps per box. Labeling Station Mékanika 2004 with a new printer installed in 2017 Outfeed Stacker and chains Mekanika 2004 Lift and stacking system with hydraulic and pneumatic control which counts the number of boxes required per lift and allows the labeling of the final product and the securing of the elevator for shipping. End Matcher doucet 2008 this Unit used to cut out defects in individual planks and recreate the tongue, groove and bevel in each individual plank. Several spare parts are available for the varnish line.

Operational specifications:
50-65 FPM Stroke Rate
Average operating rate of 60 fpm
At a maximum rate of 65 FPM - 6,500 FPM. production

 

This is a block of text. Double-click this text to edit it.

Also available

Alain Beland

Senior

David Roy

Controller / Representative

Denis blackburn

Senior representative

BST machinery

1140 Cote Terrebonne, Terrebonne (Quebec) J6Y 1G5

Contact us

We would love to hear your comments or answer your questions. Do not hesitate to use the form below and we will get back to you as soon as possible.
Ⓒ BST 2021 Machineries, Design: Webez
magnifycross
en_USEnglish