New machines
Latest arrivals

Used machines

Edge banders

Filter
Biesse CNC Controller Edgebander
Workboard height 10-60 MM , edge thickness of the edge 0.- 4.3 Strips of edge thickness 0.4 -10 MM Positioning of the upper pressure controlled by CNC Controller. Anti-Stick Units Pre-milling (Milling) ,Preheating Unit ,Glue Pot Double Ended Trimmer, Top and Bottom Trimmer Top and Bottom Corner Rounding Corner […]
SEE THE PRODUCT
Doucet Return Conveyor
Available at the end of March. 36" wide. In operation. Loaded on your transport.
SEE THE PRODUCT
Doucet Return Conveyor
DOUCET BT 2024 return conveyor for "left-hand" edgebanders such as Homag & Biesse: Features: Line shaft drive with motorized rollers covered in PVC; The overall dimensions of the receiving/transferring section are approx. 68" long x 63" wide. The return conveyor measures 30" x 150". […]
SEE THE PRODUCT
Edgebander SCM Pre-Milling Corner Rounding 2017
2 units of glue. Automatic Positioning .Equipped with 2 Pre-Milling Stations .Corner Rounding Station (2) .Edge thickness 0.4- 12 mm. Panel thickness: 8-60 .Touchscreen . Front and rear trimmer. 15°. Up and down trimmer. Self-positioning high and low profile scraper. Glue trimmer. Buffer high and […]
SEE THE PRODUCT
Edgebander CEHISA PRO-6
Edgebander Cehisa Pro-8, 220 volts 3 phase Year: 2005 Glue pot change in 2020 Automatic magazine for strip feeding or from coils Heavy duty guillotine for up to 3mm edge banding Teflon coated glue pot Capable of applying edge banding: 0.4 to 3mm thick. End Trim saw station: 0.45 HP – 12000 […]
SEE THE PRODUCT
Sold
Edgebander Holzher 1329 Premium
Description . Edge thickness in roll: .4 to 3 mm Edge thickness in strip: 8 mm (15 mm possible with tool change on the multifunctional cutting unit) Edge strip length: 13.78" minimum to unlimited Thickness of the panel: 8 to 60 mm Minimum width of the part: […]
SEE THE PRODUCT
edgebander
Glue applicator, end trimmer, trimming unit and cleaning brush. Turnkey 2-year warranty.
SEE THE PRODUCT
Edgebander Holzer 1315 2007 with corner rounding unit
Edgebander Holzher Sprint 1315 2007 with corner rounding * MAXIMUM THICKNESS….8mm * MAXIMUM HEIGHT…50mm * MINIMUM WORK PIECE LENGTH….180mm * MINIMUM WORK PIECE WIDTH…60mm * VARIABLE FEED SPEED UP TO…..18M/MIN * CARTRIDGE (Quick Heating) GLUE SYSTEM * END TRIM UNIT * CORNER ROUND UNIT * TWO MOTOR TRIM SAW UNIT * RADIUS […]
SEE THE PRODUCT
Edgebander CEHISA pro 9 220 volts 1 phase
Edgebander Cehisa Pro-9, 220 volts 1 phase Year: 2015 Glue pot for hot melt, internal Teflon coating, electronic thermostat, Automatic feeding for edges in rolls and semi-automatic for 3 mm pre-cut edges, 5 underpads mm (OPTION), Two feed speeds 9 / 14 m/min (PRO-9, PRO-10, PRO-11, PRO-12), […]
SEE THE PRODUCT
OPTIMAT edgebander
In very good condition, was in operation until December 2021 Pre-milling Corner rounding unit
SEE THE PRODUCT
CEHISA edgebander
Cehisa Pro-9, 220 volts 3 phase edgebander with tranfo for operation on 600 volts Year: 2006 Glue pan for hot melt, internal Teflon coating, electronic thermostat, Automatic feed for edges in rolls and semi automatic for 3 mm pre-cut edges, 5 mm mattress sheets (OPTION), Two feed speeds […]
SEE THE PRODUCT
Sold
Singing tackler Biesse
Biesse Jade 225 bander with Pre-Milling. Description: Sizing, Gluing, End Cut Flush, Round Surface, Radius Scraper, Glue Scraper and Cleaning Brush. total machine length: 4168 mm panel thickness: 10 - 60 mm height of edge material: 14 - 64 mm edge thickness: 0.4 - […]
SEE THE PRODUCT
Biesse Akron 445 edgebander
Biesse Akron 445 premilling edgebander Year 2010 Premilling Pellet glue pot. Machine takes 3 mm. End cut 2 motors. Rough and fine Trimming, super-finish. Corner rounder for 3 mm. Scrapers Scrapers. Polisher. Physical dimension 15 feet
SEE THE PRODUCT
IMA FBA / II / 170 / B + NOVIMAT SYSTEMS / I / G80 / 840 + / I / G80 / 950
IMA FBA / II / 170 / B + NOVIMAT SYSTEMS / I / G80 / 840 + / I / G80 / 950 - automatic panel sizing and edge banding line with return conveyors, PUR glue system, magazine for 36 belts , NS. 1,254,000 m of edge, year 2007/2010 - Additional info on request VIDEO: https://www.youtube.com/watch?v=bWMhpRADgIc IMA FBA / II / 170 / B + NOVIMAT SYSTEMS / I / G80 / 840 […]
SEE THE PRODUCT
Sold
Homag Pre-Mill Corner Rounding Edgebander
Homag certified edgebander. Complete with Pre-Mill Corner Rounding. 19,000hrs with Ligmatech return conveyor. Can be sold separately.
SEE THE PRODUCT
Sold
SCM Olimpic K560 edgebander
Edgebanding 0.4 mm - 3 mm Panel thickness 8mm - 60mm compressed air 6 bars High production with large number of panels at the same time Speed of 12 - 18 m per minute RK trim unit: 3 different machining Orion One Plus control; simple and intuitive machine operation with display […]
SEE THE PRODUCT
1 2 3

Alain Beland

Senior

David Roy

Controller / Representative

Denis blackburn

Senior representative

BST machinery

1140 Cote Terrebonne, Terrebonne (Quebec) J6Y 1G5

Contact us

We would love to hear your comments or answer your questions. Do not hesitate to use the form below and we will get back to you as soon as possible.
Ⓒ BST 2021 Machineries, Design: Webez
cogmagnifycross
en_USEnglish
fr_FRFrançais en_USEnglish