Edgers - Multiple - BST Machineries

Filter

Complete edging line with a suction cup system at the entrance which feeds your products to an entrance conveyor which feeds the 48″ edger. 22Kw motor for the 48″ edger. 16′

SEE THE PRODUCT

Mereen Johnson Model 431 Multiple Edger

Mereen Johnson Gang Rip Saw Model 431 31" Capacity 75 HP Main Motor 5 HP Feed Motor Variable Feed 30-150 feeds per minute All Saw Blades Included 460 Volt 3 Phase 60 Cycles C/O. Speed Optimization System Cameron Taylor Food

SEE THE PRODUCT

Multiple Edger Newman Whitney KF-24

Multiple 24" edger of 60 HP RPM/ 2960 ..Latte change in September 2021..

SEE THE PRODUCT

Sold

Mereen-Johnson Model 312-DC/SR2 "Select-A-Rip" Multi-Rip Saw Two moving "Select-A-Rip" blades with moving laser guides 12" clearance 2-3/4" Max. Thickness using 14" Tooling Dia. . 6" Throat 50 HP 3600 RPM TEFC Mereen-Johnson Direct Arbor Drive DOUBLE-VEE power chain, contoured hardened cams, extruded structural aluminum power slats with [… ]

SEE THE PRODUCT

Cosmec 16" Multiple Edger

40 HP MOTOR 16″ CAPACITY RUBBER DECK WITH 3 LAZER . SPEED FROM 16 TO 98 FT MINUTES. WEIGHT OF 6,000LLS . SAW DIAMETER 12" TO 15" .

SEE THE PRODUCT

Sold

COSMEC 10 inch multiple edger

SEE THE PRODUCT

Sold

Raimann Multiple Edger 2 mobile blades

Raimann Model KM-310M Slitting Saw with Two Movable Blades with Valu-Rip IV Feeder Maximum Cutting Capacity Width 12.2 "Chain Width 13.5" Two (2) sets of kickback fingers on feed Rollers Servo-controlled hold on entry and exit Equipped with (4) laser lights 12 "blade capacity […]

SEE THE PRODUCT

Sold

Raimann Movable Blade KM310-M1 Multiple Edger

50hp RPM 4,200 Multiple Edger with a movable blade and fixed blades of 2 or more .. With a valuRip system and BTRS 71 doucet return conveyor of 5 'x 8' at the outlet of 36 "wide and 14 'long. Variable speed of 12-115 FPM.

SEE THE PRODUCT

Mereen Johnson 424 Multiple Edger with Mécanica Feeder

With Mékanika feeder Motor of 75 HP with a rpm of 3,600. 4857 Hours. 24 '' capacity. 14 '' blade. Thickness of 3 ½ ". Speed of 30 to 170 bpm. Dimension of 86" x 90 "x 70". Weight of 12,500lls.

SEE THE PRODUCT

Multiple edger Comact 4 movable blades

Edger model: 948T 30 X 2 Multiple saw 1 groover & 4 mobile saws mounted on hydraulic servo valve Can take up to 30 inches wide x 2 inches thick x 36 inches long min. 150hp motor Hydraulic unit (3 pumps between 15 and 20 hp) with cooling unit

SEE THE PRODUCT

Sold

Raiman Multiple Saw 2 Movable Blades MVR PLUS

2 movable blades and one fixed. Width of 12-¼ ". Minimum length of the piece is 20". Maximum workpiece thickness is 4-½ "50HP motor. RPM of 4,200. Blade diameter is 12" with a 2-½ "chuck. Variable speed of 13-115 PMP. With Valu system -Rip Plus with 4 […]

SEE THE PRODUCT

Sold

Holytek Multiple Edger - FRS-12-30

Multiple Edger - FRS-12-30 Main Motor: 30 HP Saw Shaft Diameter: 50mm Sleeve Diameter: 70mm Blade Diameter: 200 ~ 300mm Saw Shaft Speed: 3800 RPM Drive 2 HP motor Variable speed: 7.5 ~ 30 m / min Maximum cutting width: 300 mm Maximum thickness of […]

SEE THE PRODUCT

Sold

Combined glider with multiple edger

2-sided glider with 20-inch multiple edger. 20 "x 8" capacity. High Motor / 25Hp. Low / 20Hp. 4 knives with jointer. 60Hp saw motor. (Notes) Another Pinheiro glider comes with this one for parts.

SEE THE PRODUCT

Muliple Saw LANGZAUNER

Can take 6 "x 6" and slit into thin strips. Still in office.

SEE THE PRODUCT

Multiple edger SCM M3

Bridge in excellent condition. Maximum width 12 inches Variable speed 30 to 150 feet / min. 40 HP motor Blades (12 Saws in stock) Mandrel: 12 ″ x 2 3/4 ″ in diameter Anti-reverse. Table: 6 '' x 3 ''. Automatic chain lubrication. Adjustable input guide Minimum part length: 14 ″ Maximum thickness […]

SEE THE PRODUCT

Sold

Mereen Johnson 424 DC Multiple Edger

75HP .RPM 3,600 rpm motor. 24 '' capacity. Speed from 50 to 150pmp. Only 5,800 hrs. 14 '' saw diameter. 3½ maximum thickness. 22 '' minimum length. 5,800 HOURS.

SEE THE PRODUCT

1 2 Next

Used machines

Multiple Rip Saw

Alain Beland

David Roy

Denis blackburn

BST machinery

Contact us