Boere TPK 900 36 inch glider sander Model: TPK-900 Year 1998 36 inch capacity Voltage 600 volts Station 1 straight knife glider Station 2 sandblasting with rollers. Machine in very good condition. Floor space 8-1/2 feet x 7 feet x 7 feet high
4-headed glider. 9 "wide and 4¾ high work surface. Bottom motor 7.5hp. Right and left side 10hp, Top 10hp. 1½" chuck, RPM 6,000rpm. 6ft table at the entrance. 26ft / Minute speed. A head set included. Few hours of use. Overall dimension 138 "x 51". Takes little space. […]
The table is equipped with five rollers to achieve better feeding effect The feeding chain is lubricated automatically The belts on the lower cutting head are changed quickly Upper and lower cutting heads in Sprial Centralized lubrication system provides convenience additional for the lifting mechanism The surface of the […]
Equipped as standard with an automatic thickness controller, easy and quick adjustment of the cutting thickness. Standard cutting heads for upper and lower straight knife for precise and powerful two-sided planing in one pass. Automatic digital thickness control for fast and precise setup. The surface of the work table […]
Spiral head motor 20CV / 600 / 60C / 3Ph with new pellets. Combined head motor 15CV / 600V / 60C / 3Ph Table lifting motor 0.25CV / 600V / 60C / 3Ph Drive motor 2CV / 600V / 60C / 3Ph Electrical intensity 38A Diameter of the spiral head 150 mm Dimensions of pellets 15 x 15 x 2.5 mm (228) - 6 rows Maximum working width 910 mm Minimum length […]
Boarke 52103NRK Three Head Sand Glider 52 "Width Capacity: 52" First Head: Helical Carbide Leveling Head (Double Sided Knives) First Head Motor: 50 HP, 230 / 460v, 3ph Second Head: ~ 9.5 "Grooved rubber drum Second head motor: 30 HP, 230 / 460v, 3ph Third […]
Strato glider Holytek Hk-610, 2001 Lower spiral head motor 15HP / 600V / 60C / 3Ph Upper spiral head motor 20HP / 600V / 60C / 3Ph Bridge lift motor 0.5HP / 600V / 60C / 3Ph Motor drive 3CV / 600V / 60C / 3Ph Electrical intensity 47A Diameter of the spiral heads 125 mm Dimensions of the tablets 30 x 12 x 1.5 mm (96 tablets per head) Rotation speeds of the spiral heads […]
Engines / Upper head: 25 CV / Lower head: 20 CV / Drive: 3 CV Elevation: 0.5 CV / Maximum working width: 635 mm / Maximum working thickness: 200 mm Minimum working length: 310 mm / Drive to variable speed: 6 ~ 26 m / min […]