New machines
Latest arrivals

Used machines

Moulders

Filter
Weinig Model U23E Five Head Moulder
Weinig Model U23E Five Head Moulder Capacity: 9" x 5" Spindle Diameters: 1-13/16" Spindle Configuration: Bottom - 10 HP, Right/Left - 20 HP, Top - 20 HP, Bottom - 15 HP Feed Motor: 5 HP Variable Speed Feed 78" Feed Table Sound/Safety Enclosure Pricing information and additional photos on […]
SEE THE PRODUCT
Sold
Moulder Flooring Fixed measurement
Floor planer with fixed measurement. Variable speed of 10/150M/Min. Working width is 30/150 MM. The bottom work head is angled at 30 degrees which gives better leveling quality. Double saw on top for anti-cuping.
SEE THE PRODUCT
Weinig Hydromat 200 PMP Moulder
6 head moulder High speed .200PMP . With Doucet infeed table. Conveyor at the entrance and exit that feeds 2 Holytek balers (not included) to cut faults with chalk reader.
SEE THE PRODUCT
8 Head Moulder Plus 1 Universal Head
8 head moulder (4 side heads) (2 heads up) (2 heads down) plus 1 universal head. 160 HP of motor strength. Price and additional info on request.
SEE THE PRODUCT
Sold
7 head moulder
Taiwan 7 Head Moulder. In good condition. Roller in the table for better training.
SEE THE PRODUCT
Sold
Weinig 4-sided Moulder / Glider
4-headed glider. 9 "wide and 4¾ high work surface. Bottom motor 7.5hp. Right and left side 10hp, Top 10hp. 1½" chuck, RPM 6,000rpm. 6ft table at the entrance. 26ft / Minute speed. A head set included. Few hours of use. Overall dimension 138 "x 51". Takes little space. […]
SEE THE PRODUCT
Sold
Weinig 6 Head Powermat 500 12 "Inches Moulder
Working width: 12 "maximum Working thickness: 6" Max Head sequence: - Bottom - 15 HP motor - Right side - 15 HP motor - Left side - 15 HP motor - Top - 40 HP motor - High - 30 HP Motor - Low - 20 HP Motor HSK Style Heads for […]
SEE THE PRODUCT
Moulder Weinig Unimat 23
Unimat 23 Moulder With working capacity of 9-1/16" x 4-3/4" Bottom-10 HP, Right/Left-20 HP, Top-15 HP, Top-20HP and Bottom-10 HP motors Chuck diameter speed: 1 13/16" @ 6000 RPM with mechanical digital readout of all spindles. Power: Variable speed from 20 to 118 FPM; 5.5 HP motor Power/Tables: […]
SEE THE PRODUCT
Sold
Weinig Gold moulder
6 head moulder. Engine / low 10hp. Guide side / 10 hp. Operator / 15 hp. High / 15hp. High / 15hp. Low / 20 hp. 40 mm chuck with RPM / 6000. Brake for all motors. Digital reading. Speed from 18 to 85 pmp / min. Input table of 6'6 ". Weight of 6,500lls. Small rust of […]
SEE THE PRODUCT
IIDA 10 Head High Speed Moulder.
Dimensions 230mm by 120mm. Drive speed 120M / Min .Shaft -50mm Head: 1-Down / 20hp- 2-Right / 20hp-3-Left / 20hp-4-Up-25hp-5-Right / 15hp 6-Left / 15hp-7- Down / 20 / hp-8-Right / 20hp-9-Left / 20hp-10-Up-25hp. Heads 8 and 9 are facing each other. 10 suction outputs of 150mm. 225kva transformer included. Digital position indicator. Excellent moulder for engineered flooring or moldings. All tables are chrome hardened.The pressure pads are in hardened steel.Cabin […]
SEE THE PRODUCT
Powermat Weinig CNC 7 Head Moulder
SPECIAL MACHINE FOR FLOOR ENGINEERING CAPACITY: 57-133 MM WIDE HSK SHAFTS DRIVE SPEED 8-100 METERS / MINUTE LOW 15 HP / LOW 15 HP / HIGH 15 HP SIDE 15 HP / SIDE 15 HP SIDE 15 HP / SIDE 15 HP
SEE THE PRODUCT
Sold
Weinig moulder
5 head moulder plus 1 universal head. Only ((1,500)) hours. Working width 9 "x 4 11/16". 40mm chuck. With an RPM of 6000. From 20 -78pmp. 6ft table at the entrance. Engine Low / 10hp Right / Left 15hp High 15hp Universal 10hp. Suction cup size and heads included (10 Pellet Heads).  
SEE THE PRODUCT
Mikron Multiple moulder with Routher 652R
unit size: 34 "wide x 30" deep x 65 "high (5 'min. front to back clearance needed) worktable size: 38 wide x 24" deep weight: approx. 1400 lbs. motor: 7-1 / 2 HP, 3-Phase Baldor Super E arbor: 1-1 / 4 "diameter, 6" long spindle: 6000 rpm (reversible) feed rate: 0 to 30 feet per minute (forward and reverse) [ …]
SEE THE PRODUCT
Embossing Roller
This embossing roller engraves patterns on wood or MDF particle. 16 inch wide chrome roller.
SEE THE PRODUCT
Sold
V HOLD 6 Head Moulder
6 head moulder in good condition with all heads. Bottom / 7.5KW. Right /7.5Kw Left 7.5kw Top / 11kw Top / 11kw. Low 11kw.
SEE THE PRODUCT
Weinig 7 Head Moulder
MODEL: UNIMAT 22 A SERIES: 222-1549 VOLTS: 600 YEAR: 1990 CAPACITY: 220 MM SPEED: 20 TO 120 FEET MINUTE DRIVE BY CARDAN JOINT 5.5 KW SHAFT DIAMETER (40 MM) AUTOMATIC FEEDER 7 HEADS INCLUDED LOW 7.5 KW RATED 7.5 KW 11 KW SIDED 11 KW HIGH 15 KW LOW 11 KW HIGH 11 KW
SEE THE PRODUCT
1 2

Alain Beland

Senior

David Roy

Controller / Representative

Denis blackburn

Senior representative

BST machinery

1140 Cote Terrebonne, Terrebonne (Quebec) J6Y 1G5

Contact us

We would love to hear your comments or answer your questions. Do not hesitate to use the form below and we will get back to you as soon as possible.
Ⓒ BST 2021 Machineries, Design: Webez
cogmagnifycross
en_USEnglish