New machines
Latest arrivals

Used machines

Products

Filter
Spray Boot paint booth
Paint Chamber, Spray Boot 4 Guns. Additional information on request.
SEE THE PRODUCT
Automatic Saw Line Optimize.
Optimize booter with automatic entry, lever system with suction cup, feed conveyor. Programmable saw with Kicker system at the exit. More information on request. Video available.
SEE THE PRODUCT
48 Inch Edging Line.
Complete edging line with a suction cup system at the entrance which feeds your products to an entrance conveyor which feeds the 48″ edger. 22Kw motor for the 48″ edger. 16′
SEE THE PRODUCT
Strato glider Holytek HK-610
Strato glider Holytek Hk-610, 1998 24” Lower spiral head motor 15CV/600V/60C/3Ph Upper spiral head motor 20CV/600V/60C/3Ph Deck elevation motor 0.5CV/600V/60C/ 3Ph Drive motor 3CV/600V/60C/3Ph Electrical intensity 47A Diameter of spiral heads 125 mm Dimensions of pellets 30 x 12 x 1.5 mm (96 pellets per head) Speeds of […]
SEE THE PRODUCT
SCM edgebander model Stefani md RM 2018
SCM edgebander model Stefani md RM 2018 GENERAL CHARACTERISTICS Variable chain feed speed m/min 10-22 Panel thickness mm 10-60 Edge thickness in strips mm 0.3-15 Edge thickness in rolls mm 0.3-3 Section max. edge in rolls mm² 135 Magazine width edge in strips mm 195 Max. speed. solid wood material work […]
SEE THE PRODUCT
CNC Biesse 5 X 12 Solid Table
Full table of 5 X 12 with 9.5Hp Bush Pump. Safety mat. 16Hp motor with variable speed from 12 to 32,000 Rpm. Tool holder (10). Work in X (143″) in (Y 61″) in Z (7″). Vertical Drilling 5- (X -Y) Horizontal Drilling 2- (XY) Floor space ( […]
SEE THE PRODUCT
Conceptair 50 HP Dust Collector
Concept-air 50 hp dust collector to 12000 cfm standards Included control panel, flame front deflector, anti-explosion panel. 50 hp fan approximately 12000 cfm. 600 volts Valve charging fan Included exterior piping. rotary valve summer/winter valve shaker type with pockets Control panel with soft start starter
SEE THE PRODUCT
HOLZER 1402 edgebander
Technical Specifications: - 32" diameter disc for coil feed - adjustable bar for strip feed - 3/8" edgebanding thickness capacity glue cartridge system (no glue pot) - two-roll pressure section - two high-frequency end trim motors - two high -frequency tilting flush trim motors - two buffing moto - outboard support panel
SEE THE PRODUCT
Sold
Holz-her Sprint 1327 2019 edgebander
CNC controlled Glue Jet EVA and Pur bonding system. Min/Max Edge Thickness 0.4-8 mm (0.016 – 0.315”) Thickness 0.4-3 mm (0.016-0.157”) Panel Thickness 6-60 mm (0.236-2.362”) Workpiece Width Min. of 65 mm (2,559") Feed speed 10-18 MPM (33-59FPM) 18.5" touch screen Pre-mill, end cut, round […]
SEE THE PRODUCT
Weinig Powermat 1000 moulder
6 head moulder, Top/15hp Side. Right/15hp, Left Side/15hp, Top/30hp, Top/40hp, Bottom/30hp. RPM/12,000 Rev. HSK tools. Speed of 20-118/PMP. Stand for Tools.
SEE THE PRODUCT
OSI High Speed Glider
Up / Down Pre-Planing . Splicer .Heads on opposite side .Speed up to 600 Feet Minutes Max width of 5" ..Entrance with decanter, Weinig feeding table entry and exit conveyor.
SEE THE PRODUCT
Weinig Hydro Gripp Heads
Holder and Sets of Hydro Gripp Weinig 1"13/16 heads
SEE THE PRODUCT
Sold
Holzma Optimat Rear Load Beam Saw
4 Floating Tables169” Cutting4.9 Scoring Saw18 HP Saw Motor3 HP Scoring Saw MotorVariable Speed Speed 32-410 FPM10-125 MPM Constant ReturnTable Hydraulic 
SEE THE PRODUCT
RDL 100 hp dust collector
RDL 100 HP dust collector with van loading and external piping an extra pocket set included
SEE THE PRODUCT
1 2 3 ... 30

Alain Beland

Senior

David Roy

Controller / Representative

Denis blackburn

Senior representative

BST machinery

1140 Cote Terrebonne, Terrebonne (Quebec) J6Y 1G5

Contact us

We would love to hear your comments or answer your questions. Do not hesitate to use the form below and we will get back to you as soon as possible.
Ⓒ BST 2021 Machineries, Design: Webez
cogmagnifycross
en_USEnglish