New machines
Latest arrivals

Used machines

Saws

Filter
Holtec Pack Saw
Portable Bundle Saw. Cutting capacity 40" x 40" . With transformer included.
SEE THE PRODUCT
Scie Piché Booter
Booter in excellent condition and safe.
SEE THE PRODUCT
Trimmer Optimize Holytek
Main motor 10HP/600V/60C/3Ph Servo motor for drive 2 kW Shaft diameter 30 mm Shaft rotation speed 3200 RPM Blade diameter 455 mm (18") Maximum drive speed 70 m/ min Cuts per minute (without wood) Up to 80 cuts per minute Cutting capacity See chart for scale of cuts Minimum length of […]
SEE THE PRODUCT
Multiple Edger Newman Whitney KF-24
Multiple 24" edger of 60 HP RPM/ 2960 ..Latte change in September 2021..
SEE THE PRODUCT
Single Edger Mattison 404
29Hp Rpm/3,600 motor. 65" x 77" table. 24" stroke. 14" blade. 7,300 lls.
SEE THE PRODUCT
Sold
Mereen-Johnson Model 312-DC/SR2 "Select-A-Rip" Multi-Rip Saw Two moving "Select-A-Rip" blades with moving laser guides 12" clearance 2-3/4" Max. Thickness using 14" Tooling Dia. . 6" Throat 50 HP 3600 RPM TEFC Mereen-Johnson Direct Arbor Drive DOUBLE-VEE power chain, contoured hardened cams, extruded structural aluminum power slats with [… ]
SEE THE PRODUCT
Holzher 1205 Wall Saw
Splits 5 Feet½" x 12' long. 3" for the thickness. 3 Kw motor. Negotiable. Make an offer.  
SEE THE PRODUCT
Cosmec 16" Multiple Edger
40 HP MOTOR 16″ CAPACITY RUBBER DECK WITH 3 LAZER . SPEED FROM 16 TO 98 FT MINUTES. WEIGHT OF 6,000LLS . SAW DIAMETER 12" TO 15" .
SEE THE PRODUCT
Beam Saw Giben 12 Rear Loading
Horizontal Beam Saw with rear loading 12ft. Dimensions of 28' x 25'.
SEE THE PRODUCT
Sold
General Vertical Rip Saw
General International 90-600M1 Vertical Resaw, 230 volts 2006 Flywheel: 24 inches maximum blade 3 inches minimum 1.25 inches. Cutting capacity with trainer 11 inches wide and 15 inches high Motor: 7.5 hp Current: 230V-1 Phases With trainer model: 20-900 M1 Machine like new In very good condition
SEE THE PRODUCT
Sold
Counter Saw
Counter Saw. Stock in Warehouse. Guarantee and check.
SEE THE PRODUCT
Sold
Raimann Multiple Edger 2 mobile blades
Raimann Model KM-310M Slitting Saw with Two Movable Blades with Valu-Rip IV Feeder Maximum Cutting Capacity Width 12.2 "Chain Width 13.5" Two (2) sets of kickback fingers on feed Rollers Servo-controlled hold on entry and exit Equipped with (4) laser lights 12 "blade capacity […]
SEE THE PRODUCT
Sold
Beam saw rear loading
Panel saw with rear loading, from both sides with Numerical control
SEE THE PRODUCT
1 2 3 ... 5

Alain Beland

Senior

David Roy

Controller / Representative

Denis blackburn

Senior representative

BST machinery

1140 Cote Terrebonne, Terrebonne (Quebec) J6Y 1G5

Contact us

We would love to hear your comments or answer your questions. Do not hesitate to use the form below and we will get back to you as soon as possible.
Ⓒ BST 2021 Machineries, Design: Webez
cogmagnifycross
en_USEnglish