Cut the length continuously. Few hours of use only for tailor-made. Newly rebuilt rails and bearings, belts have little uptime. Comes equipped with heads for running T&G May have other inserts / heads designed for other uses such as finger joints. Can accommodate materials of […]
Machine specially designed to make the male and female parts of floor components or for the assembly of pieces of wood by multiple finger joints. Machine maximizing your space thanks to its linear drive. Motorized entry conveyor and exit conveyor with rollers 2.5 meters long each. Closed cabinet with limit switch for a […]
Panel thickness: 5/8 "(16 mm) to 2" (50 mm) Panel width: 1-1 / 2 "(38 mm) to 6" (200 mm) Board lengths: 4 "(101 mm) ) to 28 "(711 mm) Tolerance of difference in thickness and width: + or - 1/16" The profiling section includes the right and left grooves, […]
End Matcher Manufacturer - Doucet Serial Number - 2008-05-200 Date Installed - 2008 Specs: Unit used to cut out defects in individual boards and re-create the tongue, groove and bevel in each individual board. Operational Specifications: Controlled by defect rate. Staffing Specifications: One to two people
Doucet End Matcher EM Double Model EM-90-08-301 Working min length 12 '' Total bars (42) Working capacity 8,000 to 10,000 'per shift Volts 575 3 ph Reconditioned in 2016 Overall Dimension 21' x 10 ' x 4 '.
The GPS model splicer is designed for floor with self-locking joints or tenon and mortise. With the GPS-90 bouveteuse you can carry out or redo complex adjustments at will in a few minutes. You can then maintain the strictest tolerances, board after board ... after board. It is designed for machining […]