Catalogue - Page 24 of 32 - Machineries BST

Filter

75HP .RPM 3,600 rpm motor. 24 '' capacity. Speed from 50 to 150pmp. Only 5,800 hrs. 14 '' saw diameter. 3½ maximum thickness. 22 '' minimum length. 5,800 HOURS.

SEE THE PRODUCT

Weinig 7 Head Moulder

MODEL: UNIMAT 22 A SERIES: 222-1549 VOLTS: 600 YEAR: 1990 CAPACITY: 220 MM SPEED: 20 TO 120 FEET MINUTE DRIVE BY CARDAN JOINT 5.5 KW SHAFT DIAMETER (40 MM) AUTOMATIC FEEDER 7 HEADS INCLUDED LOW 7.5 KW RATED 7.5 KW 11 KW SIDED 11 KW HIGH 15 KW LOW 11 KW HIGH 11 KW

SEE THE PRODUCT

Superfici finishing system with double applicator and continuous drive.

Superfici Double applicator system with automatic drive

SEE THE PRODUCT

Pistorius 45 degree double angle saw 2 14 inch saw

Pistorius double 45 degree 14 '' saws

SEE THE PRODUCT

General Chant Sandblaster

SEE THE PRODUCT

18-inch Delta Radial Saw

SEE THE PRODUCT

Delta 1 1/4 shaft spindle moulder with 4 roller drive

Delta Shaft 1 1/4 Spindle moulder 4 rollers model 43-796 serial RL00642

SEE THE PRODUCT

24 inch general band saw

Band saw general model 390 serial K390 volt 550 HP 1.5 phase 3 AMP 2.1

SEE THE PRODUCT

Griggo 43 inch Wide Belt Sandblaster

Sanding machine with 2 rubber duro 40 heads. 43 "x75" Abrasive Belt Speed from 15 to 30 PMP. 1/8 "x 6½". Automatic positioning for the table.

SEE THE PRODUCT

Sold

Horizontal drilling machine Pillar H49 - 2015

The H49 is a horizontal point drilling insertion machining center. It is designed for the CNC to position the spindle, terminate in a hole, then CNC position the insert, inject glue or water (for pre-glued dowels), and pull the dowel into the hole. A part is placed in the area of […]

SEE THE PRODUCT

Sold

SCM Olimpic K 560 edgebander with Doucet return

SCM Olimpic K 560 - Bought new in 2015. This machine is in very good condition. Selected stations: Pre-shredding Endtrim Edgetrim Profile scraping Glue scraping Buffing 208 / 220v - 3ph Edgebanding thickness .016 - 1/4 ″ Guillotine capacity: 3mm Feed speed: 40/60 ft / min Panel height: 3 / 8 ″ - 1/8 […]

SEE THE PRODUCT

Rotochopper crusher

425HP engine. Horizontal. In function.

SEE THE PRODUCT

Sold

2-sided Hymmen Glue Roller

MODEL: KLM 1600 SERIES: 37079 YEAR: 1981 VOLTS: 575 63 ”DISC OUTPUT CONVEYOR CAPACITY 60” X 78 ”

SEE THE PRODUCT

Sold

Copper Crusher 2014

Crusher for Copper and Wire. 800 hours, come with three sizes of sieve, Like new.

SEE THE PRODUCT

Linear paint chamber 2015

Excellent condition, 4 head linear spray line with Kremlin Airmix guns and pumps. Can spray paint, lacquer, stain, poly, etc. Very few hours. 12 "wide capacity. Possibility of adding 2 additional heads.

SEE THE PRODUCT

5 x 10 sheet turner

This turner can rotate pieces up to 60 "x 120" in size. This turner has been in operation since November 2015. It operates on 600 volts. Additional info on request.

SEE THE PRODUCT

Prev 1 ... 22 23 24 25 26 ... 32 Next

Used machines

Products

Alain Beland

David Roy

Denis blackburn

BST machinery

Contact us