New machines
Latest arrivals

Used machines

Products

Filter
Sold
Weinig 960 Knife Profiler Sharpener
Size 91/4 ". Minimum 4" and 12 "in circumference. Variable speed from 1500 to 3000rpm. 1.5hp motor. Only 25 hrs of use. 13 gallons for the pumps and 40mm chuck.
SEE THE PRODUCT
Sold
Weinig moulder
5 head moulder plus 1 universal head. Only ((1,500)) hours. Working width 9 "x 4 11/16". 40mm chuck. With an RPM of 6000. From 20 -78pmp. 6ft table at the entrance. Engine Low / 10hp Right / Left 15hp High 15hp Universal 10hp. Suction cup size and heads included (10 Pellet Heads).  
SEE THE PRODUCT
Lifting table
2 Table of 48x60 Pentalift (4,000lls) 1 Table of 48x72 Pentalift (6,000lls) 2 Table of 48x60 trayulift (4,000lls) 1 Blue Giant Table 48x72 (4,000lls) 1 Lee Table of 48x72 (4,000lls)    
SEE THE PRODUCT
Sold
HolzHer edgebander
HolzHer 1310-4 edgebander, comes with transformer for connection on 600 volts, compact, easy to operate and versatile, puck system for glue, made of 3mm vinyl and wood edge, takes 1-3 / 4 "in thickness
SEE THE PRODUCT
Paint chamber
Paint chamber 24x14: x9 high.
SEE THE PRODUCT
Band saw
Band saw with 4 inch blade with driver. 30 HP motor.
SEE THE PRODUCT
Sold
Doucet X60 jointing machine
Doucet jointer with End press, Ideal for recovery Limit your losses with this jointer.
SEE THE PRODUCT
Floor varnish line
Description of the line of varnishes for hardwood floors with Costa Top and Bottom Sander 6 heads. Entrance conveyor Maynyx 2015 Doucet / Strapper saw section. Holds the packages against the saw and cuts the straps of the packages / The feed chains contain three pallet elevators. Destaker Doucet 2015 A vacuum machine that unstacks pieces […]
SEE THE PRODUCT
Sold
End Matcher Doucet 2008
End Matcher Manufacturer - Doucet Serial Number - 2008-05-200 Date Installed - 2008 Specs: Unit used to cut out defects in individual boards and re-create the tongue, groove and bevel in each individual board. Operational Specifications: Controlled by defect rate. Staffing Specifications: One to two people
SEE THE PRODUCT
Sold
MEC Outdoor Dryer
3,000 bf dryer. In excellent condition. Works with water.
SEE THE PRODUCT
Sold
4 x 8 Hot Press
Electric hot press with replaced plate. Transfo included. Ready for delivery.
SEE THE PRODUCT
Sold
62 "Top Bottom Glue Roller
2-sided Glue Roller. 62 "wide. Still in use and in excellent condition.
SEE THE PRODUCT
Sold
Raiman Multiple Saw 2 Movable Blades MVR PLUS
2 movable blades and one fixed. Width of 12-¼ ". Minimum length of the piece is 20". Maximum workpiece thickness is 4-½ "50HP motor. RPM of 4,200. Blade diameter is 12" with a 2-½ "chuck. Variable speed of 13-115 PMP. With Valu system -Rip Plus with 4 […]
SEE THE PRODUCT
Sold
Double-sided planer - HC-2025
Engines / Upper head: 25 CV / Lower head: 20 CV / Drive: 3 CV Elevation: 0.5 CV / Maximum working width: 635 mm / Maximum working thickness: 200 mm Minimum working length: 310 mm / Drive to variable speed: 6 ~ 26 m / min […]
SEE THE PRODUCT
VIET Opera 53 inch 2 HEAD Wide Belt Sandblaster
VIET OPER 2 HEADS 53 "wide belt sanding machine The high specialization of the Opera series guarantees sanding and results far beyond expectations. This particular configuration allows multifunctional sanding with a wide range of applications such as wood sanding solid, cabinet doors, finishing sanding, sanding […]
SEE THE PRODUCT
1 ... 20 21 22 23 24 ... 34

Alain Beland

Senior

David Roy

Controller / Representative

Denis blackburn

Senior representative

BST machinery

1140 Cote Terrebonne, Terrebonne (Quebec) J6Y 1G5

Contact us

We would love to hear your comments or answer your questions. Do not hesitate to use the form below and we will get back to you as soon as possible.
Ⓒ BST 2021 Machineries, Design: Webez
cogmagnifycross
en_USEnglish
fr_FRFrançais en_USEnglish