Depousierreur Belfab BEL75

The BEL 75 is a low capacity industrial dust collector equipped with a 7.5 HP fan generating 3400 CFM. The dust collector is available in single or triple phase electrical connections. This dust collector can filter coarse to fine dust produced by woodworking with machines running intermittently or continuously, with a moderate volume of dust. The BEL75 is recommended for applications employing one or two machines in a small space or as a stand-alone solution in a large factory.

The BEL75 uses a high performance industrial fan and filtration bags with 98.98 % efficiency at 0.5 microns.

OPTIONS (not included in the price):

• Choice of 3 dust collection systems.

Tilting trolleys with 2-fold fixing $1370.00 = $2740.00

Sleeve and collars 2 times (for Barrels) $90.00 each = $180.00
Barrels 2 times $115.00 = $230.00

• Magnetic starter in extra $675.00 for 7.5 hp 600 volts 3 phases prefiler motor.

Filtration area (sq.ft) 180
Dimensions (L x W x H) (in.) 76 ”x 48” x 108 ”
Dimensions (L x W x H) (in.) With cart 76 ”x 54” x 108 ”
Module Weight (lbs) 675
Recovery capacity (ft³) 15
Motor power (HP) 7.5
Capacity (CPM) 3400
Sound level (dB) 80
Suction diameter (in.) 10

CHARACTERISTICS
• Quick assembly and installation
• Direct drive centrifugal fan
• Non-sparking fan
• TEFC motor, UL & CSA approved
• High efficiency “beane bag” type filter bags
• Two (2) quick-release collars
• Ten (10) plastic bags to collect dust
GUARANTEE
• 12 months warranty

NFPA 664 regulations allow the use of an open dust collector with a maximum capacity of 5,000 CFM for cabinetry applications in the absence of a mechanically driven sandblaster. Consult NFPA regulations for complete details. If the installation does not develop the minimum pressure loss indicated in the table above, guillotine dampers must be used to prevent the rated amperage from being exceeded.

600 volts 3 phases