• Trained technician available for disassembly and reinstallation
• 2002
• GabbianiSI 48 + SI 64 double ended tenoners
• Calibration and grid line in 90 degree configuration
• Currently the system has 4 pins of trainers. 4 additional pins can be added (guides already existing)

1st Tenoner GABBIANI SI 48 - 45 mm / 1500

• 59 "Maximum width capacity, 5 ½" minimum width capacity, motorized opening with indicator, 76 "entry loading area. Left side adjusted.
• Each side equipped with - 10 HP - 6000 RPM cutting spindle with stacking tooling capability.
• Workstation settings with mechanical digital readings, variable feed drive, 15-118 FPM, 4 HP motor, on head hold terminals with continuous feed belts powered.
• Guides in place so you can add a second pin on each side.
• Complete with: high frequency workstations, soundproof boxes with light outlets and vacuum cleaner, separate electrical control console.
• SAG automatic in-line automatic belt transfer system at the second tenon, 82 "long with a receiving section of 52" wide by a 92 "wide section after the panel is transported. Transfer belts lift the workpiece up. second tenon The two tenons are arranged in a 90 degree formation.

2nd Tenoner GABBIANI SI 64/3000

• 118 "Maximum width capacity, minimum width capacity 8 ¾", motorized opening with indicator, 52 "feed loading area. Each side equipped with - 10 HP - 6,000 rpm cutting spindle with capacity stacking tooling.
• Workstations with mechanical digital readings, variable drive, 5.5 HP motor, 15 - 118 FPM, missing dogs on 400mm (15.75 ") centers, on head fittings with continuous feed belts.
• Guides in place so you can add a second pin on each side.
• Complete with: high frequency workstations, soundproof boxes with light outlets and vacuum cleaner, separate electrical control console.