Characteristics:

• 3x 10HP engine
• Motor Feed Drive 2.6HP
• Power board 2000mm - 78.7 "
• Speed ​​Cutter Heads 6000rpm
• Cutting heads diameter 125mm - 4.9 "
• Maximum depth cut (all shafts) 10mm - 0.4 "
• Max Planing Dimensions 260 / 160mm - 9.99 "x 6.3"
• Min Planing Dimensions 22 / 5mm - 0.587 "x 0.2"
• Min Workpiece length 380mm - 15 "
• Infinite variable speed 4-25m / min - 12-82ft / min
• Duct Extractor 250mm - 9.8 "
• Requirement 2120 CFM dust extractor
• Automatic motor start and overload protection
• Automatic cutting head brake
• 2 axis positioning control
• Automatic width and height adjustment
• 100 pairs of part sizes can be stored
• 4 pairs of room dimensions are continuously illuminated
• TERSA solid steel cutting heads with 4 HSS knives
• Vertical cutting heads and thick cutting head each with 2 dovetail grooves for the installation of 12mm- 0.47 "max profile cutters to vertical crossbows, 8.5mm - 0.33" to the horizontal shaft
• Double schedule
• Automatic shut-off of the feed unit in the event of oversized workpieces
• Anti-collision device when positioning the left cutting head
• Pneumatic feed roller pressure with central adjustment
• ] Automatic lubrication of the machine table
• Lips at toothed table at cutting head
• One exhaust connection
• UL / CSA
• Foldable 800x260mm table extension outlet