New machines
Latest arrivals

Used machines

Friulmac DET

Item: # 58073
Description

Friulmac DET:

  • Automatic machine for squaring, tenoning, profiling and sanding hardwoods and similar elements and panels for furniture, doors and windows, flooring industry, etc.
  • The heavy framing base if it is made of a structure capable of absorbing and avoiding vibrations and resonances caused by the working process.
  • The right mobile shoulder slides on two precision rectangular beams. The sliding surfaces are covered with an anti-friction material and their lubrication takes place automatically by means of a centralized oil pump.
  • The opening and closing of the movable shoulder is adjusted by means of a precision TPN screw driven by an electric motor controlled by an inverter.
  • A magnetic strip with a sensor indicates the position of the mobile shoulder. The quote visualized on an electronic digital instrument positioned on the control panel.
  • The columns and the support system of the work units are made of cast iron; Precise processing of sliding parts and dovetail guides ensures high precision and long-lasting performance.
  • The parts are fed by means of precision cast hard steel chains connected to hardened steel pins mounted on sealed and lubricated long life bearings.
  • The sliding chain structure is fixed to all the columns of the machine support.
  • Each construction element of the chain is fitted with steel plates coated with hard, non-peelable rubber. The disappearing referencing stops are positioned at a fixed distance.
  • The sliding movement of the chain occurs on the self-lubricating special fiber guides
  • The transmission of the forward movement of balanced short axis connected to the toothed wheels
  • The chain feed speed is continuously adjustable from 4 to 30 m / min
  • The upper chain workpiece clamping system consists of a special non-drivable rubber track, driven by a gear motor and a reverse gear with speed adjustment synchronous with the chain feed speed.
  • The higher pressure on the workpiece during the working process is uniform throughout the width of the machine and is achieved by means of an air compression adjustment with air pressure regulator
  • The upper pressure system with vertical electrical adjustment and visualization of operating measurements on the digital electronic indicator is located inside the control panel
  • The high precision of the sliding guides allows transverse and vertical adjustment of the working units without the need for mechanical locking
  • Positioning is carried out by means of trapezoidal screws with visualization of the indicated mechanical digital indicators
  • The working units can be tilted manually with reading of the displacement angle on the mechanical digital indicators; the inclination of the angle is variable depending on the unit used.
  • WORK MEASURES
    -Length (direction of shoulder movement), minimum: 180mm
    -Length (direction of shoulder travel), maximum: 2500mm
    -Working (working feed direction), minimum: 180mm
    -Working (working feed direction), maximum: 2500mm
    -Thickness, minimum: 10mm
    -Thickness, maximum: 100mm
  • WORK UNITS:
    Scoring unit B-28 - Station 1 right + left
    - Maximum tool diameter: 150 mm
    -Shaft diameter: 30mm
    -Shaft rotation: 7600 RPM
    Double reeving unit B-36 - Station 2-3 right + left
    -Maximum tool diameter: 250mm
    -Shaft diameter: 40mm
    Shaft rotation: 6000 rpm
  • J-33 / CR Profiling Unit (skip) - Station 4 right + left
    -Maximum tool diameter: 300mm
    -Shaft diameter: 40mm
    Shaft rotation: 6000 rpm
  • Profiling unit J-30 / CR - Station 5 right + left
    -Maximum tool diameter: 250mm
    -Shaft diameter: 40mm
    Shaft rotation: 6000 rpm
  • POWER MOTORS
    -Scoring unit B-28 (2x 2.2 kW) 4.4 kW
    -Double monogiator B36-1 (4x 5.5 kW) 22.0 kW
    -Double monogiator B36-2 (4x 5.5 kW) 22.0 kW
    -Profile unit J-33 / CR (jump) (2x 7.5kW) 15.0 kW
    -Profile unit J-30 / CR (2x 8.1 kW) 16.2 kW
    -Parts carrying the system (1x 4.0kW) 4.0 kW
    - Removable shoulder movement (1x 2.2 kW) 2.2 kW
    -Power supply track (2x 0.55 kW) 1.1 kW
    - Rail height adjustment (2x 0.55 kW) 1.1 kW
    -Total input power: 140.0 kW
    - Full load current: 220.0 A
  • Feed speed of the transport system, minimum: 4m
  • Feeding speed of the transport system, maximum: 30 m
  • Extraction speed: 30 m / sec
  • Total extraction air: 16,200 m3 / h
  • Total air consumption: 794 l / min
  • Machine dimensions (mm) - doors closed: 5035 x 7750 x 2050
  • Machine dimensions (mm) - doors open: 7425 x 7750 x 2050
  • Control board dimensions (mm): 1200 x 800 x 2100
  • Machine weight: 8300 kg
  • Control panel weight: 300 kg
This is a block of text. Double-click this text to edit it.

Also available

Alain Beland

Senior

David Roy

Controller / Representative

Denis blackburn

Senior representative

BST machinery

1140 Cote Terrebonne, Terrebonne (Quebec) J6Y 1G5

Contact us

We would love to hear your comments or answer your questions. Do not hesitate to use the form below and we will get back to you as soon as possible.
Ⓒ BST 2021 Machineries, Design: Webez
magnifycross
en_USEnglish