Air Make-up for paint chamber - 8000 CFM

Interior

Can be installed outside

Includes metal installation modules.

• An anti-freeze control is supplied with the front damper, in addition to the bypass damper which controls the air flow through the plate heat exchanger
• The heat recovery unit recovers 70% from the heat available in the exhaust air flow
• For AF, filtering is done with 2-inch MERV 8 filters. The paint filters are installed inside the paint chamber.

CHARACTERISTICS

• Corrugated aluminum sheet construction for durability
• No moving parts for minimal maintenance
• Nearly zero leak rate (virtually contamination-free)
• Epoxy paint coating available for corrosive environments
• AHRI certified performance
• Plates are manufactured from 599mm to 1994mm (23.6 '' to 78.5 '') square for small and large airflows
• Spacing between plates is 0.248 '' to 0.79 '' (6mm to 20mm) for flexibility
• Plate width can be 5 '' to over 200 '' (127mm to over 5080mm)

All technical aspects and specifications are indicative and may differ from the final product.