New machines
Latest arrivals

Used machines

Products

Filter
Panel saw SCM Si16
Panel saw SCM Si16 10 foot sliding table good condition 600 volts
SEE THE PRODUCT
Sold
LM SAWS P4 Bundle saw
The fully automated Verticut P4 system with "FACT" cutting technology offers an incredible PET cut tolerance of + - 1/32 "with a finish as good or better than conventional saws. Cutter Can load a pack of 20 feet more with a forklift on the right side ...... empty on [...]
SEE THE PRODUCT
Sold
ROJEK panel saw sliding table 5 feet
ROJEK 5 feet sliding table 220 volts 1 phase good condition
SEE THE PRODUCT
Sold
Holytek 36 Inch Planer / Sander
Spiral head motor 20CV / 600 / 60C / 3Ph with new pellets. Combined head motor 15CV / 600V / 60C / 3Ph Table lifting motor 0.25CV / 600V / 60C / 3Ph Drive motor 2CV / 600V / 60C / 3Ph Electrical intensity 38A Diameter of the spiral head 150 mm Dimensions of pellets 15 x 15 x 2.5 mm (228) - 6 rows Maximum working width 910 mm Minimum length […]
SEE THE PRODUCT
Sold
CEHISA BRYKO edgebander
CEHISA BRYKO edgebander Panel thickness 8mm - 40mm Tape Tickness 0,4 mm - 2mm feed speed 5,5 m / minute Motorized pressure roller for perfect jointing Heigh frequency and trimmers with tow end trimmering blades Top and bottom radius trimmers Hot melt glue pot Easy to use touch pad  
SEE THE PRODUCT
Sold
15 Hp dust collector
Rotary valve, starter and electrical panel.
SEE THE PRODUCT
End Matcher GMC
End Matcher with 6 heads on each side. It locks or T&G. Makes parts up to 10ft long and 10in wide. Available and in operation until the end of April.
SEE THE PRODUCT
Single edger with pneumatic guide - FR-12-PGF
Single edger with pneumatic guide - FR-12-PGF Main motor 15HP / 600V / 60C / 3Ph Drive motor 2HP / 600V / 60C / 3Ph Shaft diameter 1 "Shaft rotation speed 4500 RPM Maximum diameter of blade 305 mm Minimum working length 200 mm Maximum working thickness 85 mm Variable drive speed 17 ~ 40 m / min Distance between saw and […]
SEE THE PRODUCT
Sold
Beam Saw Rear Load
Beam Saw with rear load available in May. Still in operation. Visit by appointment. Size: 456 "x288" x96 "
SEE THE PRODUCT
Unisand 52 "Wide Belt Sandblaster
52 ″ wide belt sanding machine. Roller. Pad with vacuum mat.  
SEE THE PRODUCT
Sold
Spray Boot Paint Chamber
Spray Boot 4'x10 '. 24 '' fan. With fireplace.
SEE THE PRODUCT
Wide belt sandblaster
24 inch sandblaster. 10HP engine. Carpet in good condition.
SEE THE PRODUCT
Hydraulic Table
Several choices of standard hydraulic table or according to your criteria.
SEE THE PRODUCT
Sold
24 ”Doucet Glue Conveyor
HP: 1 24 ”WIDE INLET CONVEYOR 56 ″ OUTLET CONVEYOR 120 ″
SEE THE PRODUCT
Sold
Doucet rotating greenhouse (10.5 ′) with desiccator robot
HIGH RELIEF UNITS LOW HYDRAULIC CLAMP UNITS (2) LOW PNEUMATIC PRESSURE FEET 10.5 ′ WIDE CAPACITY (40) SECTIONS HYDRAULIC ROTATION TIGHT 36 ″ CAPACITY GLUE CONVEYOR OPTIONAL
SEE THE PRODUCT
Sold
Homag Singing Bander 2015
HOMAG, PROFI KAL 310/6 / A20 ... "HIGH-TECH" Edgebander with Pre-Milling & Dual Glue Systems, EVA (Hot Melt) + AirTec Technology.Specifications: - Working Capacity: Edge thickness, coiled stock min / max, 0.3 - 3 mm (0.012. - 0.112 "), straight edges, min / max. 0.4 - 20 mm (0.016 - 0.788"), panel thickness min / max. 12 - 60 mm (0.472 - 2.362 "). Infeed Section […]
SEE THE PRODUCT
1 ... 16 17 18 19 20 ... 33

Alain Beland

Senior

David Roy

Controller / Representative

Denis blackburn

Senior representative

BST machinery

1140 Cote Terrebonne, Terrebonne (Quebec) J6Y 1G5

Contact us

We would love to hear your comments or answer your questions. Do not hesitate to use the form below and we will get back to you as soon as possible.
Ⓒ BST 2021 Machineries, Design: Webez
cogmagnifycross
en_USEnglish
fr_FRFrançais en_USEnglish